RisiStone Systems

DuraHold2® Retaining Wall System

 

Low installed cost and long maintenance-free life are typical reasons to choose DuraHold2 ® for industrial and commercial landscaping, erosion control, protective facing and waterfront treatments.

DuraHold2 ® standard units can be used to construct gravity or geogrid reinforced walls and tie backs can be introduced to form a combination gravity / crib wall up to 25 feet high. When site conditions are satisfactory, the DuraHold2 ® system does not require reinforced footings but is designed to rest on a compacted granular base.

The DuraHold2 system has four basic elements; a standard facing unit, a coping unit, a tie back unit, and corner units (left and right).

 

System Components

 

DuraHold2 Standard Unit 305mm x 362mm x 1830mm ( height x depth x length) Nominal Imperial Measurements: 12" x 14" x 72" Weight - 447 kg (982 lbs)	DuraHold2 Corner Unit 305mm x 362mm x 1270mm ( height x depth x length) Nominal Imperial Measurements: 12" x 14" x 50" Weight - 330 kg (750 lbs) Or 305mm x 362mm x 915mm ( height x depth x length) Nominal Imperial Measurements: 12" x 14" x 36" Weight - 214 kg (971 lbs)	DuraHold2 Tie-Back Unit 305mm x 1830mm x 326mm ( height x depth x length) Nominal Imperial Measurements: 12" x 72" x 14" Weight - 454 kg (1000 lbs)	DuraHold2 Coping Unit 305mm x 362mm x 1830mm ( height x depth x length) Nominal Imperial Measurements: 12" x 14" x 72" Weight - 437 kg (961 lbs)

 

 

Resources

 

Brochure PDF

Specifications PDF DOC

Installation Guide (N/A)

Cross Section Drawings SEARCH

Design Detail Drawings SEARCH

Case Studies

---